Ortofon OM Scratch White Single Cartridge Mount
$107.99
-
Ortofon Optimum Match (OM) cartridges match most tonearms perfectly. If your tonearm has a standard headshell or a cartridge mount, then step up to optimal sound reproduction with OM’s. A glance at anyone of these cartridges will reveal Ortofon’s answer to perfect tonearm matching. Ingeniously tucked into the top of the mounting bracket is a tiny, removable weight-plate.
- If your tonearm is an standard tonearm, just leave the weight-plate.
- If your tonearm is one of the low mass types, then simply remove the weight. The mass of your OM cartridge is now a mere 2.5g.
An OM cartridge from Ortofon makes it possible to upgrade the performance of an entire music system very easily by upgrading the stylus. We offer a wide range of replacement styli for OM cartridges. With the OM cartridge you instantly hear the improvement: music you’ve heard many times takes on new dimensions.
High output and maximum scratch performance guaranteed
- Description
- Additional information
Description
Output voltage at 1000Hz, 5cm/sec. – 7 mV
Channel balance at 1kHz – 1,5 dB
Channel separation at 1kHz – 25 dB
Channel separation at 15 kHz – 15 dB
Frequency range at -3dB – 20-20.000 Hz
Frequency response – 20-15.000 Hz 3dB/-2dB
Tracking ability at 315 Hz at recommmended tracking force – 80 μm
Compliance, dynamic lateral – 6 μm/m N
Stylus type – Spherical
Stylus tip radius – R 18 μm
Tracking force range – 3,0-5,0 g (30-50 mN)
Tracking force recommended – 4,0 g (40 mN)
Tracking angle – 20°
Internal impedance, DC resistance – 750 Ohm
Internal inductance – 450 mH
Recommended load resistance – 47 kOhm
Recommended load capacitance – 200-600 pF
OM cartridge weight – 5 g
OM pre-mounted on SH-4 weight incl. screws – 14,5 g
Replacement stylus unit – Scratch White
Additional information
| Weight | .4 lbs |
|---|---|
| Dimensions | 5 × 4 × 2 in |
